For F&B and retail fit-outs
Electrical Contractor for F&B and Retail Fit-Outs
More than 60 cafés, restaurants and kiosks since 2013, planned around mall rules and your kitchen.
What an F&B fit-out needs from the electrical
Most of it is decided by the mall’s fitting-out rules and the kitchen equipment list, so we ask for both with the layout.
Load from the landlord
Allocation checked against your kitchen equipment, early.
Tenant board and metering
Metered the way the building bills.
Kitchen supplies
Three-phase isolators, exhaust supplies, gas-valve interlock.
Mall submissions
The endorsed single-line diagram and permit-to-work.
Emergency lighting and protection
SS 563 and Fire Code; RCDs per SS 638.
Signage and shopfront
On a timer where the mall sets hours.
How an F&B fit-out runs with BSH
- 1Layout, equipment list, mall guideSend them in; a quote within 24–48 hours.
- 2Load check and submissionLoad checked; the endorsed diagram submitted.
- 3Install in the mall’s hoursOur own crew; noisy work in permitted hours.
- 4Test, switch on, hand overSwitch-on with the landlord’s LEW; handover pack.
Send us your drawings
Layout, equipment list and mall guide in; a quote within 24–48 hours.
F&B outlets we have wired
In heartland malls, the CBD, Orchard and at the airport.
Frequently asked questions
Do you handle the mall’s submissions?
Yes. We prepare the LEW-endorsed single-line diagram and the documents the mall’s consultants or LEW ask for, and arrange the permit-to-work the building requires. The switch-on itself is done with the landlord’s LEW, and the building’s own consultant and LEW often charge their fees separately.
Can you work within the mall’s hours?
Yes. Each mall sets its own hours for noisy works such as hacking and drilling, and some allow them only at night. We plan the programme around them.
What if the kitchen equipment changes?
Tell us as early as you can. Swapping gas for induction or adding a combi oven changes the three-phase isolators and the load, and extra load is at the landlord’s discretion.
Do you install the gas and exhaust systems?
No. Gas work is done by a licensed gas service worker, and exhaust and air-cleaning systems by their own specialists. We provide their power supplies and wire the interlocks the mall requires.
Who certifies the installation?
Our own EMA-licensed Electrical Technicians design installations up to 150 kVA, and install, test and maintain installations up to 500 kVA. Above their limits we engage an independent Electrical Engineer as project LEW.